To carry a posthole digger from the shoulder rings of your pack or from a leash strung across shoulder and back, drill a hole through one of the handles of the posthole digger and thread about 18 inches of parachute cord through the hole. Tie a a into the parachute cord that will just fit over the knob on the other handle.
Now, with the handle’s strapped together, take a longer section of parachute cord and whip a binding around one handle as close to the digging head of the posthole diggers possible. Tie a loop into the free end of the cord, and you will find that this loop is very close to the balance point of your posthole digger.
Using a carabiner, you can clip this loop to the D-ring on the shoulder strap of your pack or, if you prefer, to a doubled leash which is slung across your shoulder and chest.
No comments:
Post a Comment
All comments are moderated, and all zombies, trolls, time wasters, and anonymous cowards will be shot.
If you do not know what that means, click here and read the whole thing.
If you are commenting on a post, be sure to actually read the post.
New information, corrections, and well-researched arguments are always appreciated.
- The Management